Square Automation
Shivane, Pune, Maharashtra
GST No. 27ABPFS9040L1ZG
TrustSEAL Verified
Call 0804860269989% Response Rate
SEND EMAIL
Product Details:
| Material | Stainless Steel |
| Model Name/Number | GSH150 |
| Automation Grade | Automatic |
| Brand | G+ |
| Color | Silver |
| IP Grade | IP 65 |
| Gear Ratio | 30K |
| High Torque Maximum | 450N.m |
| Torque | 220 N.M |
| Speed | 90 Rpm |
| Bearing | Cross Roller Bearing |
Hypoid Gear Rotary Table is a kind of gearbox integrated right angle gearbox and Hypoid gears, featured with high torque, high gear ratio, high IP grade, high precision, low wear. It adopts sliding mode to rotate, the transmission precision can reach 30 arc seconds, the transmission efficiency is up to 96%; the gear geometric tolerance ≤ 0.002mm, up to JIS0 level standard. Hypoid Rotary Table also called High Torque Rotary Stage, Hypoid Hollow Rotary Stage, Right Angle Hypoid Gearbox, etc.
Product Features of G+ Hypoid Rotary Table
•Right angle design
•High precision ,high torque, high regidity and long life
• Stable using with low noise
• Reliable and easy installation
Product Details:
| Material | Aluminium |
| Model Name/Number | SQ-85B V5 |
| Type | Electric |
| Color | Mat Black |
| Usage/Application | SPM,Laser Marking,Pad Printing,Welding,Filling & Sealing M/C |
| Brand | Square Automation |
| Rated Output Torque | 18 Nm |
| Maximum Torque | 3 Times of Rated Output Torque |
| Output Permisible Speed | 200 rpm |
| Backlash | Less than 1 arc min |
| Permissible Thrust Load | 900 N |
| Permissible Moment Load | 18 Nm |
| Runout of Output Table Surface | 15 microns |
| Parallelism of Output Table | 25 microns |
| Protection Class | IP 65 |
| Table Weight | 1.17 Kg without motor |
| Angle Range | 360 Deg |
| Max Bearing Diameter | OD 70 mm |
| Transmission Ratio | 181 |
| Actuator Type | Helical Gear |
| Travel Guide | Bearing |
| Motor | Stepper Motor / Servo Motor |
| Base Material | Aluminum Casting |
| Surface Treatment | Black Coating or Painting |
Features:
Equipped with Stepper Motor or Servo Motor and high resolution drive, working with Motion Controller to achieve automatic control.
High precision fit; High load capacity; Long lifetime
Worm gear / shaft drive system; Smooth motion
Free direct and reverse rotation
Ingenious design to minimize backlash
Special design to minimize the end runout and off center
Step motor and worm shaft connected with high-quality elastic coupler to get low noise Synchronous transmission
Servo-motor can be used for industrial application
Product Details:
| Material | Aluminum Casting |
| Model Name/Number | SQ-200B V5 |
| Brand | Square Automation |
| Angle Range | 360 Deg |
| Max Bearing Diameter | OD 170 mm |
| Transmission Ratio | 50 |
| Actuator Type | Helical Gear |
| Travel Guide | Bearing |
| Motor | Stepper Motor / Servo Motor |
| Surface Treatment | Black Coating or Painting |
| Rated Output Torque | 140 Nm |
| Maximum Torque | 3 Times of Rated Output Torque |
| Output Permisible Speed | 200 rpm |
| Backlash | Less than 1 arc min |
| Permissible Thrust Load | 4000 N |
| Permissible Moment Load | 80 Nm |
| Runout of Output Table Surface | 15 microns |
| Parallelism of Output Table | 25 microns |
| Protection Class | IP 65 |
| Table Weight | 11 Kg without motor |
Features:
Product Details:
| Material | Aluminium |
| Model Name/Number | SQ-200B |
| Brand | Square Automation |
| Color | Mat Black |
| Sizes | 200 x 200 mm |
| Usage/Application | Assembly Line Automation, Rotary Indexing SPM |
| Angle Range | 360 deg |
| Gear Ratio | 50 |
| Gear Type | Helical |
| Travel Guide | Bearing |
| Motor | Servo Motor |
| Surface | Anodise |
| Output Torque | 140Nm |
| Output Speed | 200 RPM |
| Max Torque | 3 times rated torque |
| Backlash | 1 arc min |
| Position Accuracy | 30 arc sec |
| Table Runout | 20 microns |
| Parallelism of Table | 20 microns |
| Protection Class | IP65 |
| Table Weight | 11 KG |
These Rotary Stages utilize a precision Helical gear with wheel "flexed" against the gear to ensure a proper mesh. This feature provides a high repeat ability with very smooth operation, additionally the Rotary Stages incorporate an oversize pr-loaded Bearing offers a exceptional stiffness and load capacity.
Product Details:
| Material | Aluminum Casting |
| Model Name/Number | SQ-85B V5 |
| Automation Grade | Automatic |
| Angle Range | 360 Deg |
| Maximum Torque | 3 Times of Rated Output Torque |
| Output Permisible Speed | 200 rpm |
| Backlash | Less than 1 arc min |
| Permissible Thrust Load | 900 N |
| Permissible Moment Load | 18 Nm |
| Runout of Output Table Surface | 15 microns |
| Parallelism of Output Table | 25 microns |
| Protection Class | IP 65 |
| Table Weight | 1.17 Kg without motor |
| Max Bearing Diameter | OD 70 mm |
| Transmission Ratio | 181 |
| Actuator Type | Helical Gear |
| Travel Guide | Bearing |
| Motor | Stepper Motor / Servo Motor |
| Surface Treatment | Black Coating or Painting |
| Rated Output Torque | 18 Nm |
Product Details:
| Material | Aluminum Casting |
| Usage/Application | Assembly Line Automation |
| Brand | Square Automation |
| Model | SQ-135B |
| Gear Ratio | 181 |
| Actuator Type | Helical Gear |
| Travel Guide | Bearing |
| Motor | Stepper or Servo Motor |
| Axis Load Capacity | 1400 N |
| Max Torque | 40 Nm |
| Indexing Accuracy | 30 Arc sec |
| Backlash | More than 1 arc min |
| Angle Range | 360 Deg |
| Max Bearing Diameter | OD 115 mm |
| Output Permisible Speed | 300 rpm |
| Moment of Inertia | 2.918 x 10-6 kg.m2 |
| Protection Class | IP 65 |
| Table Weight | 3.83 Kg without motor |
Features:
Product Details:
| Material | Aluminium |
| Model Number/Name | GMR60 |
| Automation Grade | Automatic |
| Production Capacity | 100 |
| Color | Black |
| Brand | G+ |
| Permissible Rotary Speed | 1080 Deg C/Sec |
| IP Grade | IP60 |
| Permissible Torque | 5.3 N.m |
| Permissible Load | 3 Kg |
Product Features of G+ Micro Rotary Axis?
Compact design with light weight
High precision and long life
Stable using with low noise
Reliable and easy installation
Custom available
Application
The Micro Rotary Axis could be applied in the following fields:
Laser equipment (multi-surface machine)
Product Details:
| Color | Black |
| Power Consumption | 750W |
| Usage/Application | Automation |
| Item Code | GSA200-05K-SV |
| Rotating Angle | Yes |
| Series | GSA |
| Brand | G+ |
| Gearing Arrangement | Bevel / Miter |
| Output Torque | 0-80 Nm |
| Input Speed | 0-2000 rpm |
| Output Speed | 0-400 rpm |
| Ratio | 1/5 |
| Material | Aluminium Alloy+Steel |
| Motor Type | Servo Motor |
| Permissible Torque | 80 Nm |
| Permissible Input Speed | 2000 rpm |
| Re-position Accuracy | +-5 arcsec |
| Platform Flatness | +-0.005 mm |
| Permissible Axial Load | 5000 Nm |
| Net Weight | 18 Kg |
Product Details:
| Material | Aluminum Casting |
| Model | SQ-135B V5 |
| Rated Output Torque | 43 Nm |
| Maximum Torque | 3 Times of Rated Output Torque |
| Output Permisible Speed | 300 rpm |
| Backlash | Less than 1 arc min |
| Permissible Thrust Load | 1450 N |
| Permissible Moment Load | 30 Nm |
| Moment of Inertia | 2.918 x 10-6 kg.m2 |
| Runout of Output Table Surface | 15 microns |
| Parallelism of Output Table | 25 microns |
| Protection Class | IP 65 |
| Angle Range | 360 Deg |
| Table Weight | 3.83 Kg without motor |
| Max Bearing Diameter | OD 115 mm |
| Transmission Ratio | 181 |
| Actuator Type | Helical Gear |
| Travel Guide | Bearing |
| Motor | Stepper Motor / Servo Motor |
| Surface Treatment | Black Coating or Painting |
Product Details:
| Material | Aluminium |
| Model Name/Number | GSN130-18K-CS |
| Automation Grade | Automatic |
| Type | Rotary Indexing Table |
| Actuator Type | Electric Actuator |
| Brand | G+ |
| Color | Black |
| Gearing Arrangement | Helical |
| Output Torque | 0-20Nm |
| Rated Power | 200-400 W |
| Input Speed | 0-2160 RPM |
| Output Speed | 0-120 RPM |
| Ratio | 1/18 |
| Bearing | Crossing Roller Bearing |
| Motor Type | Dedicated Closed Loop Stepper |
| Motor Material | Aluminium Alloy Steel |
| Re-position Accuracy | +-5 arcsec |
| Positioning Accuracy | Less Than 2 arcmin |
| Permissible Torque | 20 Nm |
| Design Precision life | 2000 Hour |
| Warranty | 12 Month |
| Net Weight | 3.3 Kg including motor |
Product Details:
| Usage/Application | Industrial |
| Material | Aluminium |
| Automation Grade | Automatic |
| Packaging Type | Box |
| Model Name/Number | GMR60-140-S-S |
| Brand | G+ |
| Phase | Single Phase |
| Permissible Load | 3 Kg |
| Permissible Torque | 5.3 N.m |
| IP Grade | IP60 |
| Permissible Rotary Speed | 1080 Deg C/Sec |
The A-B Axis is an combination application made from hollow rotary tabel. It is widely used in the mobile phone engraving and inspection fields. It also can be used for other automation product.
Using high precision gear structure and radial bearing, the torque and rigidity are improved, the load is more stable, and the servo motor or stepper motor can be segmented at any angle. It can not only satisfy the digit control that the divider can not realize, but also the positioning accuracy is comparable to the direct drive motor, and the positioning of the inertia load can be realized in a short time.
This type of Micro Rotary Axis is combined with two hollow rotary table with stepper motor or servo motor and the stand making the perfect two dimensional movement .
We can supply 9 types of Micro Rotary Axis. The center distance ranges from 100mm to 190mm.
Application: